I'm posting this because there has been some confusion about the proper ABS senso part numbers. In fact, my first trip to NAPA resulted in a very incorrect part from their computer. Too short and wrong connector. A second option was a perfect match. If you buy your sensor from NAPA, this is the one you want for the front passenger side. Correct termination at both ends and rubber stress-reliefs in proper locations.
Self explanatory.
Find this behind the radiator overflow tank and the strut tower. Be sure to put some di-electric compound on the female half of the connector before closing.
Remember to add some anti-sieze to the body of the sensor end before placing into knuckle. Clean all rust out of sensor hole before insertion. Hopefully any future removal can be done without destroying the sensor.